Assist in products selection

FGAC-S-032A-V-0.0M
22060000032

Charging device socket outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with the national standard AC vehicle charging device plug for installation in EVs

comparison

Products type

Only 4 products can be compared each time. Please select the products you want to replace.

    • Overview
    • Technical data
    • Accessories
    • Certification
    • Business data
    • Download

    Product certification

    Product advantages

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. 3D model
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Lock actuator
    8. Bag
    9. Temperature Sensor
    10. Environmental Product Compliance
    11. Cable
    12. Dimension

    3D model

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation) - 30 °C ~ 50 °C
    Ambient temperature (storage / transport) - 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power8KW
    Phase 1
    Power pin quantity3
    Power contact rated voltage 250
    Quantity of signal contacts 2
    Signal contact rated current 2
    Signal contact rated voltage 30
    Signal transmission type Pulse width adjustment
    Connection method precautions Crimp connection, cannot be disconnected
    Temperature measurement2x Pt 1000 (DIN EN 60751)

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force < 100N

    Installation

    Available installation locationInstallation in front of the board
    Limit of the installation location Only allow 0 to 90 degrees frontal tilt
    Lock actuator installation location Top center
    Mounting hole diameter 7.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basis Provided according to customer requirements
    Contact surface materialAg
    Marking material Plastic

    Lock actuator

    Cable length 0m
    Lock type Secured by locking device after insertion

    Bag

    Dimensionø350*100mm

    Temperature Sensor

    StandardDIN EN 60751
    Recommended measured current 1 mA (1 V at 0°C )
    Recommendation to measure tolerance on current sensors±1K
    Temperature range _50 °C ... 150 °C
    Temperature coefficient (TCR) 3850 ppm/K
    Long-term stability(maximum R0-Drift) 0.06 % (After 1000 hours at 130°C )
    Shutdown temperature 90 °C Equivalent to Pt 1000 value 1346.5 Ω

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Cable

    Cable composition 3*6mm²+2*0.75mm²

    Dimension

    Vehicle connector height101mm(Vehicle charging connector)
    Vehicle connector width75mm(Vehicle charging connector)
    Depth63.2mm
    Hole diameter 60mm x 60 mm
    Wire length 0m
    width76mm

    CQC parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 250V
    Rated current 32A
    IP class IP54
    Order number 22060000032
    Packing unit 5pcs/box
    Minimum order quantity 5
    Products weight (without packaging) 13.65
    3D
    FGAC-V.stp Download
    CAD Data
    FGAC-S-032A-V-03-0.0M-22A(H).dxf Download
    Data
    FGAC-S-032A-V-03-0.0M-22A(H).pdf Download

    Similar products

    Online consultation